- Junichiro Yamabe
- ◎Determination of hydrogen compatibility for Cu-Al-Ni-Fe-Mn cast alloys
prepared by varying Al and Ni contents Junichiro Yamabe; Ren Yoshimoto;
Kentaro Wada; Takafumi Yano; Kojiro Fujiyama; Takashi Iijima; Hirotoshi
Enoki Journal of Alloys and Compounds, 2024年08月,
- ◎Comparison of hydrogen diffusion properties and hydrogen-induced ductility loss of additively and conventionally manufactured 17-4PH stainless steel Junichiro Yamabe; Soma Kato; Kazuyuki Morishita; Kentaro Wada Engineering Failure Analysis, 2024年08月
- 他197件
- ◎Comparison of hydrogen diffusion properties and hydrogen-induced ductility loss of additively and conventionally manufactured 17-4PH stainless steel Junichiro Yamabe; Soma Kato; Kazuyuki Morishita; Kentaro Wada Engineering Failure Analysis, 2024年08月
- Masahiro Endo
- ◎Prediction model of S-N curve without fatigue tests or with a minimum
number of fatigue tests Y. Murakami; M. Endo Engineering Failure Analysis,
2023年09月
- ◎High-cycle fatigue strength prediction of ductile Ni-resist cast iron containing casting defects Rajwinder Singh; Takashi Matsuo; Kaito Hayashi; Masahiro Endo
International Journal of Fatigue, 2022年05月- 他130件
- ◎High-cycle fatigue strength prediction of ductile Ni-resist cast iron containing casting defects Rajwinder Singh; Takashi Matsuo; Kaito Hayashi; Masahiro Endo
- Shigeaki Moriyama
- ◎Multiwall Carbon Nanotube Composites as Artificial Joint Materials
Atsushi Sobajima; Takumi Okihara; Shigeaki Moriyama; Naoyuki Nishimura; Takako Osawa; Kazutaka Miyamae; Hisao Haniu; Kaoru Aoki; Manabu Tanaka; Yuki Usui; Ken-ichi Sako; Hiroyuki Kato; Naoto Saito ACS Biomaterials Science & Engineering, 2020年06月- ◎Micro-scale frictional behavior of a bearing steel (JIS SUJ2) in cyclic sliding motion
Yuya Tanaka; Hisao Matsunaga; Masahiro Endo; Shigeaki Moriyama
Procedia Structural Integrity, 2019年12月- 他63件
- ◎Micro-scale frictional behavior of a bearing steel (JIS SUJ2) in cyclic sliding motion
- Keiji Yanase
- ◎Plasmonic Sensing: Connecting the Dots,H.Chatterjee, D.Bardhan, S.K.Pal,
K.Yanase and S.K.Ghosh, 査読有, Journal of Physical Chemical Letters,12/,4697-4705,2021
- ◎Effect of microstructure and cycling frequency on the torsional fatigue properties of 17-4PH stainless steel,B.M.Schönbauer, K.Yanase, M.Chehrehrazi, M.Endo, H.Mayer, 査読有, Materials Science and Engineering: A,801/,202
- 他48件
- ◎Effect of microstructure and cycling frequency on the torsional fatigue properties of 17-4PH stainless steel,B.M.Schönbauer, K.Yanase, M.Chehrehrazi, M.Endo, H.Mayer, 査読有, Materials Science and Engineering: A,801/,202
- Takashi Matsuo
- ◎High-cycle fatigue strength prediction of ductile Ni-resist cast iron
containing casting defects Rajwinder Singh; Takashi Matsuo; Kaito Hayashi;
Masahiro Endo International Journal of Fatigue, 2022年10月
- ◎A practical method for fatigue limit prediction in ductile cast irons Masahiro Endo; Takashi Matsuo Fatigue & Fracture of Engineering Materials & Structures, 2019年07月08日
- 他29件
- ◎A practical method for fatigue limit prediction in ductile cast irons Masahiro Endo; Takashi Matsuo Fatigue & Fracture of Engineering Materials & Structures, 2019年07月08日
- Yuya Tanaka
- ◎Advancements in fracture toughness testing of ultra-high-strength steel
sheets: Unraveling the crack-closure effect and unanticipated thickness
independence Yuya Tanaka; Naoki Hirakawa; Kaneaki Tsuzaki; Akinobu Shibata;
Hisao Matsunaga Engineering Fracture Mechanics, 2024年08月
- ◎Role of grain boundaries and precipitates in small, fatigue crack-growth resistance of additively-manufactured, Ni-based superalloy 718 under torsional cyclic loading
Sungcheol Park; Yuya Tanaka; Saburo Okazaki; Yusuke Funakoshi; Hideto Kawashima; Hisao Matsunaga Materials Letters, 2023年11月- 他10件
- ◎Role of grain boundaries and precipitates in small, fatigue crack-growth resistance of additively-manufactured, Ni-based superalloy 718 under torsional cyclic loading